Posted on

Devon Tread 1 watch

The basic theme of this electro-mechanical timepiece is that time is told on belts (the treads) and read through windows placed over segments of those belts.

It doesn’t take long to figure out how to tell the time when looking at the dial – even though you see a lot going on. This isn’t the first Devon Tread 1 watch to tell the time via belts, but certainly is one of the coolest to do so. In a nutshell, the Devon Tread 1 offers a totally unique wearing experience that is much more akin to a electronic gadget that a traditional timepiece. It transcends both the watchmaking world and the gadget world, but borrows heavily from each. It is the Tread 1 one, and it is certainly worth knowing about.
My first hands-on experience with the Devon Tread 1 watch was outlined here. The video I took of a prototype got a surge of views (and was pretty cool I have to admit – you can click on the link to check it out ). People never saw anything like it, and it goes without saying that the watch has a significant “gee whiz” factor to it. For many, it is the ultimate watch gadget – and in many ways it is.

While the Tread 1 is large, Devon did a good job with the design to ensure wearing comfort. The case is 53.3mm wide by 47mm tall and 19mm thick. I have small wrists, so the watch will likely not look at large on your arm. As you can tell, the lug structures that the rubber strap is attached to slope down considerably in order to have the watch wrap around the wrist. This helps the watch be more stable and comfortable.
The watch case is steel, but the back of it is DLC black coated steel. There you will also find the unique serial number of the watch. It is also where the watch sits when you are charging it. The crystal is polycarbonate – the same material used for bullet-proof glass. It is also AR coated for clarity. Inside the watch is a complex assortment of microstep motors, belts, and a processor. It is a quartz regulation based device, and according to Devon it is thermo-compensated which means it should be more accurate. The processor controls the functions and all the small motors. Rather than have a crown, the watch has a controller. You sort of operate it like a crown though, and is placed at the bottom parts of the case.
Looking inside of the watch is a treat. What is really special – especially for seasoned watch lovers is just how different it is. It looks more like a machine than something you’d see in a Swiss watch. There are screws and belts, and plates. It looks like some was playing with the world’s most complex Erector set. Seeing everything work together helps you appreciate how difficult it was to design from scratch. Few people in the mechanical watch world ever design things totally from scratch as there is generations of knowledge to build off of. For Devon, no one had ever done anything like this – so they have little to guide them.

The small one-step motors I understand were originally designed for use in medical devices. They move in just one position at a time, and the on-board controllers helps tell them how many times to move. Watching the Tread 1 operate never seems to get old, but the watch is loud. Devon tried to dampen the noise as much as possible, but each time a tread moves (which is every second with the seconds belt) it makes noise. It isn’t quite a “tick,” more a quick grind as the motors turn the belts.
While the Devon Tread 1 watch is loud, Devon does include a “quiet mode.” In this mode the watch stops showing the time and goes silent. Internally it still tells the time, but doesn’t show it until you de-activate quiet mode. It is a good idea that Devon included this. You can learn more about quiet mode and how to operate the Devon Tread 1 by looking at the online instructions manual here.

While the sound of the Tread 1 can be distracting at certain times, at other times you might see it as a benefit. This is a watch meant to attract attention, and it does that both visually and through sound. Imagine for instance that you are in an elevator with a few people. They are all gonna hear the Tread 1 and look straight at your watch. What other high-end timepieces literally call attention to themselves like that?
Reading the time and wearing the watch is pretty easy. The wide strap and unique buckle are cool to say the least. Operating the Tread 1 is also pretty simple once you read the instructions. The watch runs off a lithium polymer battery that lasts about two weeks during normal use. You don’t replace the battery regularly but rather charge it. To do this Devon includes a magnetic induction charger that you simply place the watch on top of. The seconds belts also doubles as a battery life indicator because it will move in two second steps when the battery life is running out. Given all the power that the watch consumes, I would say Devon made the best of the situation. By the way, the watch does have an ON/OFF function as well to conserve energy.
When it comes down to it this Devon Tread 1 watch pretty much epitomizes California cool. It took suave geeks to make this work and to design it. It plays games with the traditional notions of high-end watches and succeeds in offering something special that hasn’t been done before. It has its quirks, but that gives it personality. According to Devon, more watches are coming, but the same concept should remain the same. This is so much more than a gadget watch, it is a lifestyle watch for gadget lovers – and I am totally one of those people.

Posted on

devon tread 1 replica watch

The unique functionality reinvents the watch, extending far beyond the boundaries of traditional watchmaking. Devon’s movement is a mesmerizing display of patented interwoven time belts that displays hours, minutes, and seconds in a way that’s never been dreamed of before.Tread 1 is the must-have timepiece for the watch enthusiast with a passion for innovation and ingenuity. This engineering masterpiece is the debut timepiece from DEVON. Tread. At the heart of the Tread 1 is an onboard microprocessor, essentially a tiny computer, that controls all of the watch’s functions.
Here it is, hands-on coverage with a close to final production ready prototype of the highly anticipated devon tread 1 replica watch. While it tells the time and is a luxury item, the devon tread 1 replica watch shares very little with the rest of the high-end watch world. Despite the fact that it has plenty of moving parts, this isn’t a mechanical watch in the traditional sense. It uses a micro-controller board, rechargeable battery, and small motors to power the movement, as opposed to being a purely mechanical machine that is spring powered. There are a series of small, micro one-step motors in the movement that pull the treads that indicate the time. The treads are sophisticated reinforced nylon belts that move around the dial in a ballet of synchronized moves. The video should illustrate that well. The Tread 1 is really among the most gadgety watches I have ever had the pleasure of wearing.
I wrote a bit more about it on the Jameslist Blog when it was first announced, but I wanted to wait to get further into it, until after I got my hands on the watch itself for some play time. Size wise it is pretty big. The squarish case is a nice mixture of curves and angles, but its dimensions are hefty. Still, the Tread 1 is surprisingly comfortable to wear. Unlike other large sizes watches with “novel” designs, the Tread 1 is a watch I think I could wear for hours and hours without and discomfort. Part of this has to do with the curved lug structures, and the form fitting, thick rubber strap. The case is in steel, due to have various levels of polish, and the back part of the watch will be DLC (diamond like carbon) coated. This prototype is sans DLC. Crystal over the dial is not sapphire, but rather the same type of polycarbonate that are used for bullet-proof windows. While at this thickness the Devon Tread 1 won’t stop a bullet, it does provide for something a bit more durable on the shatter resistance side than sapphire. Though sapphire would be more scratch resistant. However, a sapphire crystal of this shape would be extremely expensive and difficult to manufacture, significantly upping the price of this watch.
It is a good idea to understand why this watch came into existence. It is the brainchild of Scott Devon, owner of the Devon line of luxury goods. Devon is working to have a full line of clothes, fragrances, and more. There was even the Devon GTX supercar, that may eventually see its way to full production. The two existing cars are beautiful American supercars. The Tread 1 is hopefully the start of an entire new type of luxury watch brand. American in spirit, design, and manufacture. Most of the parts in the Tread 1 watch are made by aerospace part suppliers, and the watch is assembled in Southern California. Almost no one who is supplying parts to the Tread 1 has ever made, or supplied parts to a watch before. This is a new experience for them all, which gives the Tread 1 a look and feel that is unique among the legions of novel European watches that are theoretical competitors. At the same time, while the Tread 1 isn’t a cheap watch, it is far less expensive than other wild looking watches of this type that you’d find coming out of Switzerland. Further, almost all the part in the Tread 1 are made specially for the watch. Save for the small motors and screws…

As a computer and a electronic device with motors, using the watch is a bit different than standard mechanical watches. The movement functions include the hours, minutes, and seconds, as well as a function for indicating the power reserve of the battery. On a full charge, the lithium ion battery should last two weeks. The watch can be “turned off” by pressing in the crown for a few seconds. This stops the treads, but allows the watch to continue telling the time for along time until you turn it back on again. The crown is more like a switch. It is a pushers, and can be moved from left to right like a switch. It doesn’t spin all the way around. When adjusting the time, pushing the crown in one direction adjusts the hours, while pushing it in another direction adjusts the minutes. The final crown will have a nice Devon logo engraved in it by the way.
You’ll find that despite the complexity of the techie looking dial, the time is really easy to read through the proper windows. The tread with the seconds indicators on it is constantly moving horizontally on the lower dial. It makes a noise that sounds like a bionic quartz watch. To make a smaller watch with less power consumption, Devon is also working on a Tread 2 model that only shows the hours and minutes. No release or schedule for completion has been set for the Tread 2 however.
Like all those gimmicky wireless charging pads for you phones, the Tread 1 also uses wireless charging to keep the battery powered. Only here, induction charging makes more sense. There will be a unit built into the watch case that is used for charging the watch. Simply place it down on the charger and let it do its thing. The case itself needs to be plugged in to the wall. Apparently the induction charging system was a pain to engineer, but it seems to work well, and produces a safe and convenient way to charge the watch. Power for the battery only last two weeks because of the large draw of power used up by the constantly moving seconds belt.
As the Tread 1 is closer to a computer than a tradition watch, it is something with software – which can be upgraded. The same place in Southern California that will assemble the watch will also service it. Devon is set up to fully support its customers and service the Tread 1 timepieces when necessary. Enough people are confident in the product that they have some major retail partners, including Tourneau, which will be one of the places you get get a Tread 1 watch in a few months when they are released. Also look for a dedicated Devon boutique to open in Beverly Hills soon.

At $300 the Devon Tread 1 is sort of alone in the the market. Other fancy luxury watches that tell time in unique manners are closer to, or above $100,000. Then again, those are purely mechanical pieces with different types of materials, and manufacturing practices. Can you compare watches that the Devon Tread 1 reminds you of, with the Tread 1? Not really in my opinion. I see the Tread 1 as a luxury gadget that tells the time. Being American, and California grown, it shares more in common personality-wise with luxury sports cars, motorcycles, airplanes, and other modern high performance machines, than say traditional watch making. Not everyone is going to love the Tread 1, but I think it is pretty cool. It will CERTAINLY grab people’s attention, and you’ll be impressed at how it isn’t like all the things you see out of Switzerland – but rather an actually novel timepiece that will make a satisfying addition to any collector’s treasure trove, who is beckoned by the design and technology that Devon has created.